Page 1 of 1

AK1 HDD on USB-C not working (with expansion case)

Posted: Tue Mar 23, 2021 3:24 pm
by axe2021
Hello,

I received today my AK1 just purchased in March 2021 on official shop of ACEPC on amazon (AK1-8GB+256GB here). It came with installed preactivated Windows 10 professional in version 2004 released in first semester of 2020.
I am trying to use the 'expansion case' to add a HDD SATA. And it fails ! Why ??
- Windows 10 is on the internal disk of the base unit, which is working fine.
- HDD SATA i am trying to add is on the external expansion case, connected through USB-C type connector to the base unit.
It's out-of-the-box experience, my first day and first difficulty with the expansion case. Luckily, at home i had many tools to do tests.
1) Connecting the HDD SATA on another computer (it's a HP brand) with Windows 7 is working perfectly fine, the disk has drive and partition on it, and is appearing on the HP computer thru USB-A connector, and in the Disk Management tool too.

2) Connecting the HDD SATA on AK1 with Windows 10 is working perfectly fine, the disk has drive and partition on it, and is appearing on the AK1 computer thru USB-A connector, and in the Disk Management tool too.
:idea: Power consumption measurement : 4,97V@180mA. After disconnecting with Safely Remove Hardware icon : 5,01V@056mA.

3) Connecting the HDD SATA on AK1 with Windows 10 is not working at all, the disk is powered (i can hear rotation inside) but is not appearing on the AK1 computer thru USB-C connector, and in the Disk Management tool is totally absent too. And is absent too in the BIOS when plugged.
:idea: Power consumption measurement : 4,95V@134mA. With attempt to charge my own smartphone on USB-C connector : my phone is showing 4,85V@440mA.
I will post tomorrow the full illustration for the tests i already made, with their success or failure.
I joined the HWiNFO64 full report in pdf file on the zip attachment below.
I also tried to connect any memory device directly on the USB-C female connector of the unit base and without the help of the expansion case. No results.
I also tried to connect the USB-C male connector of the expansion case itself on any other computer. No results.

Although the same HDD but within an ordinary SATA metalcase and connected to USB-A of any computer including the AK1, is immediately recognized.
Any administrator could help me to diagnose or fix it ? Any other customer in same situation ?
Thanks! :)

axe2021

Tests diagram with power consumption
Tests diagram with power consumption
Full_Tableau - updated.jpg (359.65 KiB) Viewed 4129 times
Partition Guru
Partition Guru
PartitionGuru_results.JPG (419.47 KiB) Viewed 4158 times
2021-03-24-AK1.zip
HWiNFO64
(220.41 KiB) Downloaded 1425 times

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Wed Mar 24, 2021 12:05 pm
by witt
:D

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Wed Mar 24, 2021 12:08 pm
by witt
The author is a very hardworking person and a professional person.
my question
Will the USB-C adapter be incompatible? Everyone knows that some adapters are not compatible.
My advice
1. A hub with a charger should be connected, and it should be more stable than a hub without a charger. Deserve perfect support,
2. Respectively test whether these interface functions are normal.
At this price, I can easily work and browse the Internet to view information. I personally think it is worth it.

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Wed Mar 24, 2021 4:14 pm
by Gabe
axe2021,

The USB C connector on the underside of the unit is only meant for the add on drive carriage. It's not designed for traditional USB C connections or devices.

Hopefully the admin will have some advice regarding the drive not being recognized while in the add on carriage.

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Thu Mar 25, 2021 10:43 am
by admin
Hello, thank you for the detailed information. We feel your support. In the USB-C interface of AK1, it only serves to connect the hard disk box. We will try to use more compatible interfaces based on your test.

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Thu Mar 25, 2021 11:24 am
by axe2021
Thanks all for the replies.

@admin Thank you for reading my post and replied.
1) the HDD SATA in expansion case thru USB-C connector is not working on my AK1 out-of-the-box. I joined the HWInfo full report. Is there a solution we can try ? Do you have a AK1 at your office and could show me a screenshot how it behaves with a HDD SATA connected to AK1 and recognized by Windows 10 ?

2) I am trying to use the expansion case to add a HDD SATA. What to do to be able to use this feature sold in the advertisement as it should behave ?
This is the abnormal situation i try to solve
This is the abnormal situation i try to solve
Reply to admin 1.jpg (22.18 KiB) Viewed 4154 times

3) Thanks for the additional information about the USB-C connector interface used in AK1 system. So, basically if i try to use the expansion case on another computer (like my HP for example) thru USB-C connector it will never be usable ? It's not a traditional USB 3.0 interface ? Is it maybe a Thunderbolt interface ? How to tell ? How works the motherboard about that connector exactly, could we get some specs ?

Thanks, have all a nice day
axe2021

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Fri Mar 26, 2021 9:58 am
by admin
Hello, I will explain this. This interface can only be connected to the hard disk box. If the hard disk box is not recognized, we can replace you with a brand new hard disk box, or we can provide you with a little compensation and apologize for occupying your USB interface.

Re: AK1 HDD on USB-C not working (with expansion case)

Posted: Tue May 25, 2021 8:08 am
by axe2021
Solved. It was the expansion case the faultive one. With after sales, a new unit solved it.
So if your expansion case for hard disk is not recognized in Disk Management tool from Windows, then it is not the Windows faultive, neither the main unit faultive, neither the BIOS faultive, neither the motherboard of AK1 faultive, but the hard disk box faultive, in my case.
With new pc, the hard disk box is immediately recognized and shows up in Windows Disk Management tool as expected. Without formatting neither other requirements.