Best Minipc Forum

I can get to bios setup screen, but unit will not boot from the eMMC, the ssd I added; or the rescue micro SD card I made up before I added the ssd hard drive. Any suggestions? I just bought this of the Terryza store via an order placed on Amazon on January 5th of this year.\

Stu

sdd,

Does it boot to the eMMC storage if the add on SSD is not connected?

Had not thought to try that I will however shortly.-Just tried it and no just continually reboots showing the Terryza logo, then it shuts off and reboots. Rinse and repeated.

I may have solved it. I removed the ssd and tried the reboot, that did not work, reinstalled the ssd and checked the bios again and this the setting that said "UEFI Hard Disk Drive BBS Priorities" appeared to have changed. I changed it to boot from the SSD and tried to reboot and it went into Win 10 and it seems to be back.

sdd,

I'm glad you were able to get it working.

Congratulations, I am also very happy.
Regarding your question, this is because the system did not detect your hard disk for the first time, and the system could not be imported.

I made the Win 10 rescue disk on a micro sd card. Will that be able to be read if necessary or should I recreate it onto a thumb drive?

sdd wrote: ↑Wed Feb 03, 2021 3:35 pm I made the Win 10 rescue disk on a micro sd card. Will that be able to be read if necessary or should I recreate it onto a thumb drive?

I don't know if it will boot to the SD card, but you can always try to see if does, and then if it does just exit out of it. Press F7 on unit startup to enter the boot menu and then see if it shows the SD card as a boot option.

With this said, the unit can definitely boot to a USB Recovery Drive, which is the method I'd recommend.