Page 1 of 1
Mind-block - How to Autostart T6?
Posted: Tue Jan 26, 2021 7:25 pm
by Rudi452
How do I set the T6 up to start automatic when power is applied, so bypassing the power on button? I was looking for that because mine is on a smarthome outlet and switched remotely anyways. I was expecting that in UEFI settings ... do I need glasses?
Re: Mind-block - How to Autostart T6?
Posted: Wed Jan 27, 2021 2:36 am
by Gabe
Rudi452,
Check in the BIOS (Del or Esc key on power up) to see if there is an option that says "Automatic Power On" and enable it. It should turn the unit on when power is applied.
It's primarily designed to restart a unit after sudden power loss.
Re: Mind-block - How to Autostart T6?
Posted: Thu Jan 28, 2021 8:27 am
by Rudi452
Not only primarily, it only reboots when power failed but not when powered down before. So, not suited for my case.
Re: Mind-block - How to Autostart T6?
Posted: Thu Jan 28, 2021 10:13 am
by admin
Please turn on the computer and press the Del button, enter the BIOS and take a picture. We will send the BIOS according to your version.
Re: Mind-block - How to Autostart T6?
Posted: Thu Jan 28, 2021 2:05 pm
by Rudi452
After several starts the problem cured itself without me doing something. I does now start when power applied.
Re: Mind-block - How to Autostart T6?
Posted: Thu Jan 28, 2021 11:42 pm
by Gabe
Rudi452 wrote: ↑Thu Jan 28, 2021 2:05 pm
After several starts the problem cured itself without me doing something. I does now start when power applied.
That's good to hear.