Best Minipc Forum

I have an AK2, bought from Amazon in November. It's been working fine but, today, the plug was accidentally pulled out from the wall while it was on. Now, it won't boot up. The HDMI is fine, and the power is plugged in. When I plug in the power, the LED goes red, then goes off. When I then press the power button, the LED shows blue, then goes off. There's no other action, such as the fan firing up.

I looked at the video here ( thinking it might do the trick, but that's a different model to mine, so it doesn't.

Please check this tutorial:

Thank you very much. I'll try this tonight.

Thank you for trying.

admin wrote: ↑Thu Jan 28, 2021 2:11 am Thank you for trying.

I appreciate the help but, when I remove the sticky feet, there are no screws under them.

Singularity,

The four screws are deep down in the holes that are uncovered when the feet are removed. The cross head (Phillips head) on them is pretty small. I use a PH0 (3.0mm) screwdriver for them.