Best Minipc Forum

Hello friends, it seems that when it broadcasts to two bands 5g and 2.4g it goes crazy.
You have to enter the device manager, look for the wifi driver and in the advanced options mark / 802.11 / ac wireless mode
so we get it to use only a stable signal
sorry for my English

thanks

Hello there! Thank you for the tutorial you provided for this, and we use you as an example.

New T6 with a Realtek 8821CU Wireless Lan 802.11 ac USB NIC - the T6 would either not connect, or would connect only briefly (30 seconds or so). Based on the above post, I played with the Advanced "Wireless Mode" setting which was originally set to "Auto". Eventually I found that setting it to "802.11 b" worked - the PC connected immediately and consistently. I think the correct setting will vary depending on your wireless network.