Page 1 of 1
Restart after power failure
Posted: Wed Jan 13, 2021 5:01 pm
by andymet87
Hi all, hoping someone can help...
I have this...
I desperately need it to automatically restart after a power failure as the PC is being used as a small server. I have changed the Auto Power to 'Power On' in the Bios but it still does not turn on after a power cut.
Please can someone advise what I need to do to get this working?
Thanks in advance
Re: Restart after power failure
Posted: Wed Jan 13, 2021 9:25 pm
by Gabe
andymet87,
Which model do you have?
Re: Restart after power failure
Posted: Tue Feb 09, 2021 9:21 am
by 123
I have this problem too in an ACEPC AK3V
Re: Restart after power failure
Posted: Thu Feb 25, 2021 3:57 am
by admin
AK3 can be powered on in the BIOS, this is the tutorial:
Re: Restart after power failure
Posted: Tue Jul 27, 2021 3:25 am
by magicman
I found a solution,
in my case it starts on after power loss if I disconnect USB-CD drive, I leave the connected only Bluetooth keyboard.
My cd drive is has usb split, I need to install the second usb into TV usb to provide neded power to drive, as It does not work properly if I connect it to the ACEPC only.
I have HDD inside as well.
I suggest disconnecting all USB devices and see if it will work for you as in my case. I guess some static electricity of something else does not allow to work this feature properly.
I have acepc with celeron j3455
admin wrote: ↑Thu Feb 25, 2021 3:57 am
AK3 can be powered on in the BIOS, this is the tutorial: