Best Minipc Forum

Hello,

I am trying to install Dietpi / Debian Linux on the ACEMAGIC & AOC Collaborate on T8PLUS Intel 12th Alder Lake-N97 Mini PC. However it fails.

Config for the ACEMAGIC & AOC Collaborate on T8PLUS Intel 12th Alder Lake-N97 Mini PC is :

Processor: Intel Alder N N97 processor, 4 cores / 4 threads (6MB cache, base frequency 2.0GHz, turbo frequency up to 3.6GHz)
Graphics: Intel® UHD Graphics, 1.2GHZ
Memory: 16GB LPDDR5 3200MT/s ×1
Storage: 512GB M.2 2242 SATA SSD 1 x M.2 NVMe PCIe3.0 SSD / SATA SSD slot, up to 2TB
Wireless Connectivity: Onboard WiFi 5+BT4.2
Video Output: HDMI2.0 ×3 (4K@60Hz）

----------------

During the install, all goes well, however it ends with the below set of error:
update-initramfs -u -k all
This might take a few minutes...
update-initramfs: Generating /boot/initrd. img-6.1.0-28-amd64 /lib/firmware/bnx2x/bnx2x-e2-7.13.15.0.fw for module bnx2x
W: Possible missing firmware /Lib/firmware/bnx2x/bnx2x-e1h-7.13.15.0.fw for module bnx2x
W: Possible missing firmware /lib/firmware/bnx2x/bnx2x-e1-7.13.15.0.fw for module bnx2x
W: Possible missing firmware /lib/firmware/bnx2x/bnx2x-e2-7.13.21.0.fu for module bnx2x
W: Possible missing firmware /Lib/firmware/bnx2x/bnx2x-e1h-7.13.21.0.fw for module bnx2x
N: Possible missing firmware /lib/firmware/bnx2x/bnx2x-e1-7.13.21.0.fw for module bnx2x
W: Possible missing firmware /lib/firmware/bnx2/bnx2-rv2p-09ax-6.0.17.fw for module bnx2
W: Possible missing firmware /lib/firmware/bnx2/bnx2-rv2p-09-6.0.17.fw for module bnxz
W: Possible missing firmuare
N: Possible missing firmuare /1ib/firmware/bnx2/bnx2-mips-09-6.2.1b.fw for module bnx2
W: Possible missing firmuare /lib/firmware/bnx2/bnx2-rv2p-06-6.0.15. fw for module bnx2
W: Possible missing firmware /lib/firmware/bnx2/bnx2-mips-06-6.2.3. fw for module bnx2
done!
아이애애애애애애애애애애애애애애애애애마이애이에이이이이이어아이이어어어어어어어어어어어어
Shutting down the Logical Volume Manager
Finished Shutting doun the Logical Volume Manager end of restoreparts job for image Dietpi_NativePC-BIOS-x86_64-Bookworm_Installer-tmp-cnvted. end ot restoredisk job for image DietP1_Nativepc-B105-x86_64-Bookworm_Installer-tmp-cnvted.
아이에이애애애애애애애애애애아이이이이이이이이이이이이이이어어어어어어어어어어어어어어어어어어어어어어어 아이애애애애애애애애애애애애애이이이이이이이이이이이이이이이이이어어어어어어어어어어어어어어어어어어어
is program is not started by clonezilla server, so skip notifying it the job is done.
Finished!
The mounted bitlocker device was not found. Skip unmounting it.
Now syncing - flush filesystem buffers...
Synchronizing cached urites to persistent storage... done!
Disk /dev/sda is not a hard disk drive. No need to park it.
Will poweroff. . . 5 4 3 2 1

Please help if this is a known issue

Also where are the drivers for this minipc, for windows and linux

I've moved your topic to the T8 Plus section. Hopefully someone will be able to give some advice.

Here is the download link for all T8Plus drivers:



(Please note: Google Drive limits the number of file downloads for non-Google accounts. If you receive a message stating that the limit has been reached, please log in to your Google account and try downloading again.)

If the issue persists after reinstalling the drivers, please send us your purchase order number for verification (to protect your privacy, kindly send it via private message or email: barry@minipcunion.com). Once we verify the details, we will assist you in resolving the issue as quickly as possible.

Hello,
Please let me know if these drivers are for Windows or Linux. The device i received was not booting so wanted tk try installing windows or linux, both of whicb was failing.

Thanks!

cktechie wrote: ↑Sat Jan 11, 2025 2:09 pm Hello,
Please let me know if these drivers are for Windows or Linux. The device i received was not booting so wanted tk try installing windows or linux, both of whicb was failing.

Thanks!

The drivers barry provided are Windows drivers.

Thank you both!

I will reach out to Barry with details as he requested.