S1 inside photo

[MiyaCulpa]

I am adding a photo for those who are curious about the inside of the computer. While I was opening it, I renewed the thermal paste with high quality Mastergel maker.

[dragonpoo]

Nice job, MiyaCulpa. I admit, I was curious what the other side of my S1 looked like, but since there's really no reason to take it apart (unless I have thermal paste), I think I'll be keeping it intact.

Did you notice any performance or temperature differences between the stock paste and what you put in?

[MiyaCulpa]

Nice job, MiyaCulpa. I admit, I was curious what the other side of my S1 looked like, but since there's really no reason to take it apart (unless I have thermal paste), I think I'll be keeping it intact.

Did you notice any performance or temperature differences between the stock paste and what you put in?

It drops 3-4 degrees
The screen on it does not show the temperature exactly correctly, I measured it with hwmonitor

[MiyaCulpa]

I also installed two M.2 coolers that I cut from 2mm aluminum and applied thermal paste between them.Because normal M.2 coolers are thick, the magnetic cover does not close.
The temperature dropped by 5-6 degrees

[dragonpoo]

Those are noticeable differences in temperature, nice job!

[Paolo57120]

Je l'ai fait aussi, j'ai gagné 6 degré ou plus et le couvercle ferme bien (Refroidisseur M.2, 70X22X3mm)