Having just purchased AX15 (and also AK2 Plus a few months ago) - both of them I am unable to adjust brightness? Is there a fix for this - is it a known problem? tried usual reinstalls etc.
Re: Brightness Control
Posted: Sun May 05, 2024 10:24 am
by barry777
Use the shortcut keys [FN] + [F6] to increase the screen brightness, and [FN] + [F5] to reduce the screen brightness. For more information, please refer to the following video:
Re: Brightness Control
Posted: Sun May 05, 2024 10:27 am
by GarDJ
Thanks so much for quick reply, those function keys don't work - whilst the slider may change the brightness doesn't
Re: Brightness Control
Posted: Mon May 06, 2024 5:15 pm
by dragonpoo
Are you missing any device drivers? Have they been updated recently? In Windows, you can also go to Settings > Display and find options to adjust the brightness for the screen.
Re: Brightness Control
Posted: Mon May 06, 2024 8:50 pm
by GarDJ
Hiya, all drivers OK - Settings - Display shows slider but that has no effect either. I even tried a fresh System reinstall from WINPE USB as posted here the display sliders were the same, having no effect, this was before any updates took place. Still the same after updates. Puzzling?
Re: Brightness Control
Posted: Mon May 06, 2024 11:26 pm
by dragonpoo
Yeah, it's quite puzzling! Usually, if the display slider doesn't work, it seems like there's some type of driver missing. Function keys aren't always part of the display drivers, but usually relate to some extra graphics software, so maybe something is missing? Sadly, I don't have one of these laptops so I'm not sure what graphics adapter they have in place, but if you can figure that out, check the software bundles for this laptop, or check with AMD/Intel's website for something?
Re: Brightness Control
Posted: Tue May 07, 2024 4:25 pm
by GarDJ
Found the problem (escalated to support)
The System Image graphics driver is not installed correctly - any updates after installation do not rectify the problem.
Events
Device PCI\VEN_8086&DEV_46D2&SUBSYS_80231E50&REV_00\3&11583659&0&10 requires further installation.