Install dual systems Part II：Win10 to HDD/SSD
Posted: Mon Mar 30, 2020 8:53 am
A. Make a PE boot disk (see Part 1)
B. Disk partitioning (see Part 1)
C. Using Dism ++ to backup / restore the system
Migrate system (D drive) on EMMC to SSD (E drive)
A. Using Dism ++ to back up the EMMC system
Load EMMC (D Disk) System
Backup EMMC image
Choose image storage location and name
Mirror backup ...
Migrate image to HDD / SSD
Select the image to release
Select the HDD / SSD (E disk) where the image is released, and restart the computer after the release is completed.
Press the keyboard DEL key, enter the BIOS device first boot item is HDD / SSD system disk
B. Disk partitioning (see Part 1)
C. Using Dism ++ to backup / restore the system
Migrate system (D drive) on EMMC to SSD (E drive)
- Step1.jpg (233.49 KiB) Viewed 3664 times
Load EMMC (D Disk) System
- Step2.jpg (110.79 KiB) Viewed 3664 times
- Step3.jpg (136.21 KiB) Viewed 3664 times
- Step4.jpg (207.13 KiB) Viewed 3664 times
- Step5.jpg (46.56 KiB) Viewed 3664 times
Select the image to release
- Step6.jpg (141.45 KiB) Viewed 3664 times
- Step7.jpg (179.55 KiB) Viewed 3664 times
- Step8.jpg (139.39 KiB) Viewed 3664 times
- Step9.jpg (78.12 KiB) Viewed 3664 times