AK1PLUS Wrong number of CPU Threads

[eminga]

Hi, I've a AK1PLUS with ubuntu 12 installed. The N95 product specifications states 4 core / 4 threads but this is the output of the lscpu command on linux:

Code: Select all

> lscpu
Architecture:            x86_64
  CPU op-mode(s):        32-bit, 64-bit
  Address sizes:         39 bits physical, 48 bits virtual
  Byte Order:            Little Endian
CPU(s):                  4
  On-line CPU(s) list:   0-3
Vendor ID:               GenuineIntel
  Model name:            Intel(R) N95
    CPU family:          6
    Model:               190
    Thread(s) per core:  1
    Core(s) per socket:  4
    Socket(s):           1
    Stepping:            0
    CPU(s) scaling MHz:  31%
    CPU max MHz:         3400.0000
    CPU min MHz:         800.0000

Only 1 Thread per core.

I have to change some option in the BIOS to unlock the other threads?

Thanks

[Gabe]

As far as I know, the N95 only has one thread per core, so four threads total. It doesn't support Hyper-Threading.

[cackletinkle]

@gabe is correct

4 cores; 1 thread/core = 4 threads

[eminga]

OK, many thanks!