GK3V V26D bios

Post Reply
Tomilov_dn
Posts: 2
Joined: Wed Jan 10, 2024 3:59 am

GK3V V26D bios

Post by Tomilov_dn »

Hello, does anyone have a BIOS for my version of motherboard?
Attachments
IMG_20240109_175120.jpg
IMG_20240109_175120.jpg (469.2 KiB) Viewed 38377 times
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 2080
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 48 times
Been thanked: 123 times

Re: GK3V V26D bios

Post by Gabe »

They normally only provide a BIOS when there is genuine need for it. If you do have that need, I would state what it is.

You can also contact barry, a tech for the company, at barry@minipcunion.com, though again, he'll ask for the reason you're requesting the BIOS.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10 • AK1
I have no connection to ACEMAGIC other than being a customer and long time forum member
Tomilov_dn
Posts: 2
Joined: Wed Jan 10, 2024 3:59 am

Re: GK3V V26D bios

Post by Tomilov_dn »

The device stopped turning on. The red LED lights up, the fan turns on, after a couple of seconds everything turns off. Once it was possible to restart normally by disconnecting the battery. But now nothing helps. I took it to a local computer service center, they said that they couldn’t do anything, the problem was most likely with the BIOS.
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 2080
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 48 times
Been thanked: 123 times

Re: GK3V V26D bios

Post by Gabe »

Tomilov_dn,

Just in case it might help, try reseating the storage and, if it has detachable RAM, the RAM as well, though I think the RAM in the GK3 is soldered to the system board.

Also, if you haven't tried to reset the CMOS, I would do so. The procedure is as follows...



If neither of these things helps, I would contact barry at the email address indicated in my prior reply.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10 • AK1
I have no connection to ACEMAGIC other than being a customer and long time forum member
Post Reply

Return to “J4125(GK3)”