Page 1 of 1
T11 Will not switch on Red and Blue Light
Posted: Wed May 31, 2023 6:31 pm
by Jlstacey2001
Hi
My T11 will not switch on? I just get a red and then blue light flash but nothing happens.
Re: T11 Will not switch on Red and Blue Light
Posted: Wed May 31, 2023 7:55 pm
by Gabe
I would suggest trying a BIOS discharge. Unfortunately, there is no video for the procedure with the T11, but if you know how to take the unit apart the procedure itself, as in what you need to do with the battery terminals, would be the same as with other models, like in the following video for the AK3. Make sure everything is disconnected from the unit when you do this, including the power.
Re: T11 Will not switch on Red and Blue Light
Posted: Wed May 31, 2023 9:33 pm
by Jlstacey2001
Thank. I gave it a go but still won’t switch on. I did notice a high pitch noise though that I wasn’t getting before.
Re: T11 Will not switch on Red and Blue Light
Posted: Wed May 31, 2023 9:40 pm
by Gabe
Jlstacey2001 wrote: ↑Wed May 31, 2023 9:33 pm
Thank. I gave it a go but still won’t switch on. I did notice a high pitch noise though that I wasn’t getting before.
In that case I'd contact after sales support at
support@kamrui.com. Depending on its age, however, there may not be much they could do with it, but it's still worth a shot.