Page 1 of 2
Upgraded ram and now keeps going black
Posted: Sat Apr 22, 2023 3:09 am
by bfc53005
Hello,
So I upgraded my ram from 2x8gb to 2x32gb. Had trouble getting it to recognize one of the slots. Finally got that figured out, powered it up and finally got my 64gb of ram. Was messing around on the pc and all of the sudden the screen when black. Nothing would get it back on. Powered off then on the pc, got the screen back. Works for a couple of mins then it goes out again. Any ideas?
Re: Upgraded ram and now keeps going black
Posted: Mon Apr 24, 2023 9:17 am
by barry777
1. Disconnect all connections and press the reset button on the fuselage for 5~10 seconds.
2. Install the original 2*8GB memory.
Re: Upgraded ram and now keeps going black
Posted: Sun May 07, 2023 12:35 pm
by Bentouz
I have the same issue, why would reverting to the original ram would change anything? Thanks
Re: Upgraded ram and now keeps going black
Posted: Mon May 08, 2023 8:00 am
by barry777
This may be caused by memory incompatibility, it is recommended to use Samsung memory.
Re: Upgraded ram and now keeps going black
Posted: Fri May 26, 2023 7:41 pm
by cwodrsret
I am having the same issue, Barry777 states "This may be caused by memory incompatibility, it is recommended to use Samsung memory, The 2x8GB memory that came with my ARM5 are ADATA not Samsung. This is my 2nd AMR5, not having any issues with the 1st one, this second one I put the same memory in that I did with my 1st one.
Re: Upgraded ram and now keeps going black
Posted: Sat May 27, 2023 4:22 am
by Wine
May need to change the clock speed of the RAM in the BIOS, set it to around 1333, or other low speed, at first, to check stability and some apps/games, then increase to the next setting and do the same again until it acts up again or reaches the rated speed of the new RAM.
Could also check to make sure the RAM voltages are correct, you may need to increase it to what is listed on the new set.
Re: Upgraded ram and now keeps going black
Posted: Mon May 29, 2023 8:16 pm
by cwodrsret
Unfortunately, you can't change the Speed in the BIOS.
Re: Upgraded ram and now keeps going black
Posted: Tue May 30, 2023 9:03 am
by barry777
If the original memory can be used normally, it may be that the new memory is not compatible with the Mini PC and the startup is abnormal.
The reason why Samsung’s 32GB memory is recommended for upgrading memory is that Samsung’s memory has better compatibility.
Re: Upgraded ram and now keeps going black
Posted: Thu Aug 10, 2023 7:18 pm
by kiumanware
Pregunta:
¿SE ha probado la memoria SAMSUNG de 32 GB a 3200MHZ corroborando que funciona correctamente?
Yo he instalado Kigston Fury 64GB a 3200 y me presenta el mismo problema a pesar de que en la lista de compatibilidad de memorias Kingston es la primera.
Saludos
Re: Upgraded ram and now keeps going black
Posted: Mon Aug 14, 2023 3:19 am
by barry777
kiumanware wrote: ↑Thu Aug 10, 2023 7:18 pm
Pregunta:
¿SE ha probado la memoria SAMSUNG de 32 GB a 3200MHZ corroborando que funciona correctamente?
Yo he instalado Kigston Fury 64GB a 3200 y me presenta el mismo problema a pesar de que en la lista de compatibilidad de memorias Kingston es la primera.
Saludos
The compatibility of Samsung memory is better than that of Kingston.