Best Minipc Forum

Hello,

I got an Ace Magician AD03 Mini pc. Where I can download the Win 11 drivers ? I had to reinstall Win 11 and is missing some drivers in device manager. The intel driver and support assistant only detect the integrated GPU. Thank you.

Hello.
Which driver is missing for your AD03?

Hello,

For some reason can not paste a screenshot in the message but they are listed under
"Other devices" as
PCI Device
PCI Device
PCI Simple Communications Controller
SM Bus Controller
Unknown device

My friend just received his AD03 today and I was tasked with setting it up for him. The first thing that I did was export all the drivers.

If the Admins are willing to grant permission, I could make the drivers available, but I don't want to do this without getting permission.

It is recommended to reinstall the system to solve it. Our system files integrate related drivers.
AD03 system file link:
Reinstallation system tutorial:

Try https://www.driverscloud.com/ before to reinstall Win11!
Driverscloud is free, guaranteed virus-free, with no unwanted additions.

It is recommended to install the brand's system. The driver program is integrated in the system file, and the system installation is faster and more convenient.

Thank you for the links to both. Will keep in mind for future occasions.

Unfortunately those directions for the recovery image dont give any directions in case you get an error, which I got "Unable to find USB Drive Letter".

Required accessories: U disk or mobile hard disk equal to or greater than 16GB

1. Download the system file through the link;

2. Insert the U disk into the USB port of the computer;

3. Right-click the U disk, select format, select NTFS format for the file system in the format window, fill in [WINPE] for the volume label, and then start the quick format;

4. Use decompression software and decompress system files;

5. Cut or copy all the decompressed system files to the U disk;

6. Eject the U disk;

7. Insert the U disk into the USB port of the Mini PC where the system needs to be installed;

8. Press F7 during startup, select the U disk and press enter to enter;

9. Automatic installation;

10. After the installation is complete, you will be prompted to press any key to continue (the screen will be black and restart during this period, and the power supply cannot be disconnected during this period, and the power supply must be kept);

11. Enter the setting system. During the setting period, there is no need to connect to the Internet. After the setting is completed, you can enter the desktop for use.

If none of these steps work, the USB drive may be defective and another USB drive should be replaced.