Page 1 of 1
Failed windows 10 install
Posted: Mon Aug 24, 2020 10:22 pm
by jlthorburn
I down loaded the 1903 iso files created an install usb per instructions installed but wont boot? script ends at press ecs in 1 sec to skip startup,nsh any other key to continue?
Now what?
John
Re: Failed windows 10 install
Posted: Tue Aug 25, 2020 2:30 am
by admin
Please refer to the tutorial for system installation:
Recall if there is any wrong operation.
Eliminate the wrong operation, it may be caused by the damage of the U disk. It is recommended that you try to replace the U disk.
Re: Failed windows 10 install
Posted: Tue Aug 25, 2020 2:08 pm
by jlthorburn
Created usb drive and it booted. ISO files installed.removed USB. Upon exit, Windows won’t boot. You said replace u drive? Do you mean the USB stick?
Re: Failed windows 10 install
Posted: Tue Aug 25, 2020 3:08 pm
by jlthorburn
The USB was a ScanDisk brand. I will get a new USB drive and try a new install... ScanDisk no good to us as boot drive...
John
Re: Failed windows 10 install
Posted: Wed Aug 26, 2020 1:48 am
by admin
I also encountered a problem while making the tutorial. The USB memory sticks belong to Kingston and SanDisk. I suggest you try a new memory stick. If it still fails, please let us know with pictures.
Re: Failed windows 10 install
Posted: Sat Aug 29, 2020 12:43 am
by jlthorburn
Had to disconnect the installed SSD. After that seamless USB install of windows 1909 onto the emmc now have good internet speed on both wifi and lan.
Thanks,
John
Re: Failed windows 10 install
Posted: Mon Aug 31, 2020 8:17 am
by admin
Thank you for your support and hope you can use it happily.