Disassemble and discharge the AK1
Posted: Thu Jul 16, 2020 7:55 am
This video has important meanings. The graphics and text can not demonstrate the operation in detail. Please perform the operation with this video: viewtopic.php?f=35&t=225
AK1 BIOS Disassembly Discharge Diagram: The first step, the screw is hidden under the foot pad, we need to remove it, and then use a screwdriver to remove the screw.
Step 2: Observe the inside of the disassembled machine. The red circle is where the BIOS battery is located.
The third step is to take out the motherboard if you want to remove the BIOS battery. You need to disassemble the machine further and use a screwdriver to remove the two screws that fix the motherboard.
In the fourth step, the motherboard can now be taken out to facilitate our operation. We have fixed a layer of adhesive paper on the BIOS battery. We need to tear it off to remove the BIOS battery.
The fifth step, when we remove the BIOS battery, use tweezers to block the two-pin pin to export the electricity. For detailed and specific operations, you need to view this video: viewtopic.php?f=35&t=225
AK1 BIOS Disassembly Discharge Diagram: The first step, the screw is hidden under the foot pad, we need to remove it, and then use a screwdriver to remove the screw.
- step1.jpg (1.65 MiB) Viewed 3327 times
- step2.jpg (2.28 MiB) Viewed 3327 times
- step3.jpg (2.17 MiB) Viewed 3327 times
- step4.jpg (1.89 MiB) Viewed 3327 times
- step5.jpg (1.99 MiB) Viewed 3327 times