Best Minipc Forum

T5_1909 Win10_1909_Pro:
T8U Win10_1909_Pro:

PS: T5_1909 Win10_1909_Pro, T6 can also be downloaded, because they have the same BIOS, T8U Win10_1909_Pro, T11 can also be downloaded, because they have the same BIOS.
Before downloading, you need to back up your files, and you need to pay attention, if your computer is not a problem, you do not have to download, WINDOWS update is to solve the BUG, download requires a lot of storage space, will increase the pressure on MINI PC, may Will cause stuttering.

what should i use to write it on usb? power iso didn't worked.

How do I put this on a bootable usb? A verified tutorial/link please !!!

I didn't understand your question. Is your USB interface disconnected?

Hi, the problem is that the downloads don't contain the required boot image file. Really, the easiest thing to do would be to pack these up as a bootable ISO with the correct image file; you could then use something like Rufus to write the image as a bootable USB.

You said "I didn't understand your question. Is your USB interface disconnected?"

It is very simple to understand. The file is a .zip file not an image file, therefore how is it supposed to be used. If the file was a .iso then the image could be used to make a bootable USB.

So how are people supposed to use this zip file?

This is a video tutorial for system installation:

Where is the .zip file we have dowloaded shown

T5_1809_Home_X64_6255_en_de_es_fr_it_ru_zh_20190906
T8U_1909_Pro_X64_6255_en_de_es_fr_it_ru_zh_2020013

The tutorial on how to use those downloads is needed as you can not mount a zip or use Rufus to create bootable media from those.

Do you not have .iso image of those zips or can you create a .iso image so we can download and use Rufus.

Have you actually tested those zip files to confirm they work?

On the video you say "The first step, write the boot image"

The video shows you format the disk

Where is the boot image?

You then eject

You say "The second step, install system image"

Where is the image?

You just put the usb into ACEPC and boot off it but there was no image on it, or you missed out the bit where the image was put on it.

So what do we do with the .zip we downloaded.

T8U_1909_Pro_X64_6255_en_de_es_fr_it_ru_zh_2020013.zip

Rufus gives error message.

Can you check the supposed image files or test them, abecause the zips do not work as they will not mount.

bickern wrote: ↑Mon Aug 03, 2020 5:44 pm So what do we do with the .zip we downloaded.

T8U_1909_Pro_X64_6255_en_de_es_fr_it_ru_zh_2020013.zip

Rufus gives error message.

Are you unzipping the file first? A zipped file needs to be unzipped before it can be used.