Page 1 of 1
Insert Boot Media in selection device and press key
Posted: Sat Oct 02, 2021 11:25 pm
by Jay4710
Hello guys i recently bought an Acepc mini pc. It was working fine until one day the screen went into Boot mode and its asking for “Insert Boot Media “ can someone please help me how to reboot my pc.. Thank you in advance
Re: Insert Boot Media in selection device and press key
Posted: Sat Oct 02, 2021 11:53 pm
by Gabe
The first thing to try would be a BIOS discharge, but we need to know which model you have in order to provide the proper instructions.
Re: Insert Boot Media in selection device and press key
Posted: Sun Oct 03, 2021 12:55 pm
by Jay4710
I have Mini PC Intel Core i5-7200U
Re: Insert Boot Media in selection device and press key
Posted: Sun Oct 03, 2021 6:43 pm
by Gabe
Jay4710 wrote: ↑Sun Oct 03, 2021 12:55 pm
I have Mini PC Intel Core i5-7200U
That's not the model number, but from your description it sounds like it could be a CK2.
The following are instructions for the BIOS discharge of an AK3, but the layout is similar and the basic instructions regarding the battery would be the same. See if the following helps...
Re: Insert Boot Media in selection device and press key
Posted: Sun Oct 03, 2021 7:54 pm
by Jay4710
The model number is CK2 . I tried to reboot it a few times my self and try to reinstall Windows again but it seems like its not on the hard drive at all . The video was very helpful i will def try it thank a lot !
Re: Insert Boot Media in selection device and press key
Posted: Sun Oct 03, 2021 8:15 pm
by Gabe
I hope it helps. If it doesn't, however, and if when trying to reinstall the system it's given an indication that there's a problem with the onboard storage, I would contact ACEPC's after sales support at
service@iacepc.com, as there may very well be a problem with the system drive.
For reference, the Windows 10 system installation files for the CK2 are
here.