Page 3 of 3
Re: Fixing AM06Pro Testing/Update Issues
Posted: Sat Feb 01, 2025 7:37 pm
by Botorototo
Exact same error message as everybody else here: 10 - Error: Unable to load driver.
Thus, the BIOS update is impossible to update.
Even disabling Core isolation with Vulnerable Driver Blocklist disabled, the BIOS update results in the same error.
MiniPC: NiPoGi AM06PRO 5500U
Re: Fixing AM06Pro Testing/Update Issues
Posted: Thu Feb 06, 2025 4:10 pm
by Matthew71
Unfortunately also for me it is the same. Bios installing is stopping with code "10 - Error: Unable to load driver".
NiPoGi AM06 PRO Ryzen 7 5825U 32GB RAM
Re: Fixing AM06Pro Testing/Update Issues
Posted: Fri Feb 07, 2025 6:38 am
by Matthew71
In case of Error 10 it seems not to be the BIOS file, but the flash tool from AMI.
I downloaded the original tool from the AMI side to try the flashing of the BIOS with this, but at least it was the same result.
Then I tried only starting the flash tool within cmd and also got the same error.
Is there a possibility to flash/update the BIOS from Boot?
Re: Fixing AM06Pro Testing/Update Issues
Posted: Thu Feb 20, 2025 3:36 am
by barry777
Matthew71 wrote: ↑Fri Feb 07, 2025 6:38 am
In case of Error 10 it seems not to be the BIOS file, but the flash tool from AMI.
I downloaded the original tool from the AMI side to try the flashing of the BIOS with this, but at least it was the same result.
Then I tried only starting the flash tool within cmd and also got the same error.
Is there a possibility to flash/update the BIOS from Boot?
Please refer to the second section of the solution in the following link: Update BIOS via Shell Interface：
Re: Fixing AM06Pro Testing/Update Issues
Posted: Thu Feb 20, 2025 10:51 am
by Botorototo
barry777 wrote: ↑Thu Feb 20, 2025 3:36 am
Please refer to the second section of the solution in the following link: Update BIOS via Shell Interface：
Thanks for the instructions, hope this fixes the random reboots that plenty of users of the AM06PRO are going through - as reported here
viewtopic.php?t=5543