请在bios的Main界面截图，让我知道你的BIOS版本。
The fan sounds loud
-
Gabe
- Senior Moderator
- Posts: 2032
- Joined: Fri Apr 17, 2020 1:19 am
- Has thanked: 42 times
- Been thanked: 116 times
Re: The fan sounds loud
alanf,
Have you removed the lid to see if anything is touching the fan blades? I'm not sure that's the problem with it, but if a wire has sagged down to the point that it's touching the blades on the top of the fan it could create a sound like that. There's a wire that connects to the lighting on the lid, and if it's in just the right spot it could do that.
For reference, you can access the inside of the unit by first removing the 2.5" drive carriage that's attached to the bottom of the unit, unlocking the two sliders to do so. Then remove the unit's footpads, which gives you access to the screws. Once the screws are removed you should be able to remove the top from the unit, but be careful, as again, there's a wire attached to the lighting on that lid. Then just look to see if that wire could be the cause of the problem. If so, just move it to the side when you put the lid back on.
Here's a video that shows the unit being disassembled. The part you want to watch starts at about 3:15.
Have you removed the lid to see if anything is touching the fan blades? I'm not sure that's the problem with it, but if a wire has sagged down to the point that it's touching the blades on the top of the fan it could create a sound like that. There's a wire that connects to the lighting on the lid, and if it's in just the right spot it could do that.
For reference, you can access the inside of the unit by first removing the 2.5" drive carriage that's attached to the bottom of the unit, unlocking the two sliders to do so. Then remove the unit's footpads, which gives you access to the screws. Once the screws are removed you should be able to remove the top from the unit, but be careful, as again, there's a wire attached to the lighting on that lid. Then just look to see if that wire could be the cause of the problem. If so, just move it to the side when you put the lid back on.
Here's a video that shows the unit being disassembled. The part you want to watch starts at about 3:15.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10 • AK2 Pro
I have no connection to ACEMAGIC other than being a customer and long time forum member
I have no connection to ACEMAGIC other than being a customer and long time forum member
Re: The fan sounds loud
Ok, I received bios chip 25LQ64CVIG (1.8V) from aliex (without orginally GD25LB64C) and still working on my dump bios file.Iryseq wrote: ↑Thu Oct 06, 2022 9:21 pmThanks you for your welcome.
In the bios is 1AUAJ 0.38 x64 and on motherboard GK1_V23_VC from 2020.
After long searched I found it from you post
I have one little question about stock of bios chip for GK3V PC - where I could find for buy?
Gigadevice GD25LB64C is hard to reach.
I think about substitute for 1.8V: Winbond w25q64fw - it will be good?
File GK1003_VC.bin from gk1_v24_VC3.rar doesen't work. After plug in power, diode on front is light.
No one have bios for GK3V (GK1_V24)? Really?
I don't understand why you give me workaround with Win11? I need bios file - not OS. The newest or few version ealier.
I need bios file than I have cause my fan doesen't spinning up. Device is working fine but temperatures without fan are too hot... It's little chance for KBC problem... (Damaged)
If someone needs bios file (my dump) for GK3V (GK1_V24) - please text me.
Last edited by Iryseq on Tue Nov 15, 2022 12:03 pm, edited 1 time in total.
-
admin
- Site Admin
- Posts: 2045
- Joined: Mon Mar 16, 2020 9:11 am
- Has thanked: 79 times
- Been thanked: 46 times
Re: The fan sounds loud
Please check the private message and I will try my best to help you.
Thanks for joining the forum fans, we will become friends here. Any suggestions about the forum I am open to hearing.
