The fan sounds loud

[Iryseq]

Welcome to the forum, Iryseq
Please enter the BIOS when booting, then take a picture of the Main screen and post it to the forum. I will provide you with the latest BIOS file according to your BIOS version.

Thanks you for your welcome.

In the bios is 1AUAJ 0.38 x64 and on motherboard GK1_V24_VC from 2020.
After long searched I found it from you post


I have one little question about stock of bios chip for GK3V PC - where I could find for buy?
Gigadevice GD25LB64C is hard to reach.
I think about substitute for 1.8V: Winbond w25q64fw - it will be good?

[Gabe]

Iryseq,

I would wait for confirmation from the admin, as that BIOS may not be the right one, and flashing the wrong BIOS to a board can cause more harm than good. Note the version difference.

[Gjs999]

If you look at the motherboard it will say gk1 XXXX V4 or V5 etc
I believe that there is a list Github with different versions so i would cross reference .

https://github.com/bootuz-dinamon/GK3V-minipc

hope this helps

[HOLGERmuc]

Hallo, ich habe seit ein paar tagen diesen mini-pc / CK10 Intel i5-8279U 16 GB DDR4 512 G M.2 SSD, 4 Kerne 8-Thread 4K HDMI VGA Type-C USB 3.0 WiFi 5 BT 4.2

Der Lüfter springt bei der kleinsten unternehmung auf volltouren an für 2-3 sekunden und ist doch sehr laut! gibt es dafür einstellungen oder ein update? gibt es eventuell die möglichkeit einen leiseren lüfter einzubauen?

gruss holger

[admin]

This is what my fan sounds like - seems like the fan needs to be replaced?

Hello, sir
This sound is definitely not normal. But I can't guarantee if they have fan parts that can be replaced for you, you can contact professional customer support at support@kamrui.com.

If you are in the US area, you can PM me and I will send you a brand new GK3pro for testing.

[admin]

Hallo, ich habe seit ein paar tagen diesen mini-pc / CK10 Intel i5-8279U 16 GB DDR4 512 G M.2 SSD, 4 Kerne 8-Thread 4K HDMI VGA Type-C USB 3.0 WiFi 5 BT 4.2

Der Lüfter springt bei der kleinsten unternehmung auf volltouren an für 2-3 sekunden und ist doch sehr laut! gibt es dafür einstellungen oder ein update? gibt es eventuell die möglichkeit einen leiseren lüfter einzubauen?

gruss holger

Der Austausch des Lüfters ist beim CK10 schwierig, wenn Sie keine Probleme mit einem Lüfterausfall haben. Sie können versuchen, das Kühlsilikon auszutauschen, um das Geräuschproblem zu beheben.
Es gibt 2 Threads über den Selbstbau von Ventilatoren durch professionelle Kunden.
Studie 1
Studie 2

[admin]

https://github.com/bootuz-dinamon/GK3V-minipc

hope this helps

Thanks for the additions! I hadn't been uploading to Github. your upload makes the file more complete. I will put your upload on top.

[Iryseq]

If you look at the motherboard it will say gk1 XXXX V4 or V5 etc
I believe that there is a list Github with different versions so i would cross reference .

https://github.com/bootuz-dinamon/GK3V-minipc

hope this helps

Iryseq,

I would wait for confirmation from the admin, as that BIOS may not be the right one, and flashing the wrong BIOS to a board can cause more harm than good. Note the version difference.

As you can see, on the motherboard is GK1_V24. Which bios will be optimal?

Thanks a lot.

[admin]

As you can see, on the motherboard is GK1_V24. Which bios will be optimal?

Thanks a lot.

There is no BIOS update available for V24. You can download Win11 system directly to upgrade. Here is the download link: Win11 21H1:
Also for your installation tutorial: