Hello, i'm asking for support for selection of display at boot time:
Model: AK1
Purchase: 09/2021
Operating System: Windows installed with standard setup
My problem: AcePC boot correctly, the light is blue; But sometimes it displays on hdmi1 and sometimes on hdmi2.
I only have 1 screen (Proliant E1906S) , normally connected to hdmi1
So when i boot and there is no display, i have to manualy switch the display cable to either hdmi1 or hdmi2 which is very upset
Can you help me ?
Many thanks
AK1 booting alternativly to hdmi1 or hdmi2
Re: AK1 booting alternativly to hdmi1 or hdmi2
I haven't seen this problem on my own GK3, which also has two HDMI ports. I'd suggest generic troubleshooting to see if it helps:
Make sure you're using updated drivers for both the graphics and monitor.
Try physically unplugging the monitor's power and HDMI connection, then plugging it back in.
When you unplug from HDMI1, does it ever work if you plug back in to HDMI1? Or does it require a switch to start working?
Make sure you're using updated drivers for both the graphics and monitor.
Try physically unplugging the monitor's power and HDMI connection, then plugging it back in.
When you unplug from HDMI1, does it ever work if you plug back in to HDMI1? Or does it require a switch to start working?
GK3V (J4125/8GB/128GB) | AMR5 (R5 5600U/16GB/512GB NVMe) | JK06 (N5100/8GB/256GB) | AK1Pro (N5105/8GB/256GB) | T8Pro (N5095/8GB/256GB) | AD03 (N95/8GB/256GB) | CK10 (i7-10810U/16GB/512GB) | S1 (N95/16GB/512GB)