GK3 Secure boot bios update

[mtto]

Just tried it on my Gk3v and it works, passes all windows 11 tests. Secure boot is in the bios. After the flash it needed a few seconds before it would boot. My bios was 03/16/2021

Hello i am happy you succeeded with the bios update.
Is there a step by step guide or procedure to do it?
Thanks

[Gabe]

Just tried it on my Gk3v and it works, passes all windows 11 tests. Secure boot is in the bios. After the flash it needed a few seconds before it would boot. My bios was 03/16/2021

Hello i am happy you succeeded with the bios update.
Is there a step by step guide or procedure to do it?
Thanks

There's a Word document in the unzipped file that explains how to flash the BIOS. However, just in case, I would wait to see what others who've flashed theirs have to say, as in whether the instructions in the file are correct.

[Servo128]

Just tried it on my Gk3v and it works, passes all windows 11 tests. Secure boot is in the bios. After the flash it needed a few seconds before it would boot. My bios was 03/16/2021

Hello i am happy you succeeded with the bios update.
Is there a step by step guide or procedure to do it?
Thanks

The instructions do work, they are photos
If I was you, enter the bios and make sure yours says whats below

GK1V25 0.01 x64

If it says something different, don't flash it

[TMAL]

I took the plunge.

Nick/admin responded quickly to my request for the new BIOS.

After he checked my BIOS was the right one, he sent a link.

I downloaded the software, wrote it to USB formatted FAT32.

I had to add fs7 to startup.nsh as I have a 2.5" HD installed, which I did in notepad.

After a nervous long wait after reboot, it came up.

I enabled secure boot, and it said "Standard". Secure Boot was not enabled in Windows 11. I change "Standard" to "Custom" and then Windows 11 recognised secure boot.

Hope my experience helps others.

[jose986]

gracias

[gadge51]

hi........does any body know the name of the 8 pin bios chip in a GK3V.......THANKS

[mariusss]

will there ever be a bios for GK1V26 0.01 x64?

[TechUser]

No thanks to non-responsive @admin, I successfully updated my GK3V with the BIOS update that @gadge51 posted. Installing Windows 11 from Microsoft’s official, unadulterated ISO was straightforward. The BIOS update also replaced the splash screen logo with “American Megatrends.”

Previous BIOS information
Project Version: GK1V25 0.01 x64
Build Date and Time: 03/14/2021 14:03:58

Board information
GK1_V25A
2020.12.31

[rgvgreatcoder]

I tore down my Terryza GK3V miniPC and took a picture of the motherboard (attached).
I found my model is GK1_V23 - 2020.09.04.
Will you please make an updated BIOS so I can upgrade to Windows 11?

Terryza_MiniPC_Motherboard_model_small.jpg (63.31 KiB) Viewed 162783 times

[jose986]

actualizado con exito con arranque seguro
ahora toca descargar winows 11