ACEPC GKV3 Will not boot past BIOS

Post by **sqlrepairman** » Tue Aug 17, 2021 2:48 pm

PC has been working fine since purchase on 13th July.
Now refuses to boot past BIOS
Seems not to recognise that it has any disk drive at all.
Only drive is 128G SSD it came with
PLease advise

Post by **Gabe** » Tue Aug 17, 2021 7:18 pm

Two things you can try are first, a BIOS discharge, and then second, if it's still not working, a system reinstallation.

The BIOS discharge instructions are as follows...

The system installation download and instructional video are here.

Post by **witt** » Wed Aug 18, 2021 3:16 am

Boot into the Bios interface, usually because the system is lost, it is recommended to reinstall the system.
Here is the GK3 system download and tutorial. If the installation fails, you may need to replace an SSD
https://www.iacepc.com/forum/viewtopic.php?f=34&t=707

Post by **sqlrepairman** » Wed Aug 18, 2021 7:04 am

I followed both tutorials and the PC Still boots into the bios and will go no further. Please advise

Post by **sqlrepairman** » Wed Aug 18, 2021 7:35 pm

This PC is only just over a month old

Post by **Gabe** » Wed Aug 18, 2021 7:52 pm

In that case, you should contact ACEPC's after sales support at service@iacepc.com.

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.