Bios T11: I made a mistake

Post by **EA7GAH** » Thu Apr 22, 2021 12:49 am

I have recently acquired an ACEPC T11, on March 17, 2021.

: 03727723-34FA-41A2-BBB1-DD442FBA81B7.jpeg (580.5 KiB) Viewed 8035 times

As a user I wanted to get the best performance from the unit. So I thought it best to check for firmware and software updates to get the best possible performance. But ... I WAS WRONG.

When searching in the support forum I found the topic "ACEPC T11 bios flash" where a bios for T11 appeared. I checked the version that my T11 had installed and wrote down the following information:

Vendor: American Megatrends
Version: 5.011
Compliancy: UEFI 2.4; PI 1.3
ID: T8U007
Date: 04/27/2020 17:22:03

As I saw that the date of the .bat file was recent, March 15 of this year, I thought it was an update of the bios that was installed.

So I downloaded it and ran the firmware with the instructions outlined. But I immediately verified that I had made a mistake, that the newly installed bios was older than the one provided with the equipment and that I had lost configuration elements. (One of them is the possibility of preventing it from starting when it is supplied with power).

This is how things are now:

: ED214F17-7500-49DC-8C76-33DF28A0BCC3.jpeg (6.39 MiB) Viewed 8035 times

The point is that I would like to reinstall the bios that came on the computer but I can't find it in the forum. Is it possible that they can provide it to me? If not, would you find it somewhere?

Thanks for your attention.

Post by **admin** » Thu Apr 22, 2021 7:36 am

Hello, we will explain to you that unless you need certain features, we do not recommend updating the BIOS. The BIOS update will not bring any performance improvements. This BIOS fixes some possible Bluetooth problems. If you want to return to the version of the ACEPC logo, please download this link:

If you want to optimize performance, you can check the following link:
code entered during optimization: powercfg -duplicatescheme e9a42b02-d5df-448d-aa00 -03f14749eb61

Post by **EA7GAH** » Thu Apr 22, 2021 9:39 pm

Thank you for your quick answer. I will try and tell you the results.

A tip for new users: Better not touch the bios version that comes with the machine if it is not necessary.

Jose - EA7GAH

Post by **EA7GAH** » Mon Apr 26, 2021 4:18 pm

Hello again.

I have tried to install the BIOS included in the "admin" post and I can't.

The process that I have followed has been the following:

1.- Download the file T8U007_ACEPC_LOG_20190831.7z
2.- Unzip and run the .bat file as Administrator
3.- The process starts but in a few seconds it stops and the computer restarts.

I have repeated the process, placing the unzipped files in different folders and removable media, always with the same result: aborting the process and restarting the computer.

I have tried to send a video but cannot embed it in the post, so I send the freeze just before the reboot is launched:

: photo_2021-04-25_21-50-09.jpg (60.85 KiB) Viewed 7942 times

Any ideas?

I observe that the .bin file that comes in the package is dated 2019-08-31 and as I mentioned in my first post, my team indicated a bios version of 2020. Is it possible to obtain it to have the team as the first day?

I still regret my mistake of having made an "outdated" of the bios but I just want to correct it.

Post by **admin** » Wed Apr 28, 2021 9:43 am

Hello, please don't worry. I have already reported back to our BIOS technicians. He will reply to questions soon. Please wait for a while.

Post by **witt** » Wed Apr 28, 2021 10:02 am

Normally, the BIOS will not be modified. You can ask whether the official compatible BIOS has been updated to optimize these bugs.

Post by **EA7GAH** » Thu May 06, 2021 5:34 pm

admin wrote: ↑Wed Apr 28, 2021 9:43 am Hello, please don't worry. I have already reported back to our BIOS technicians. He will reply to questions soon. Please wait for a while.

Good morning everyone.
Sorry, I do not want to disturb but I am writing to remind you that I am still waiting for her response.
Thanks

Post by **admin** » Sat May 08, 2021 10:58 am

I'm sorry to make you wait so hard. There is no such related tutorial at the factory. We recommend that you replace a brand new T11. You can contact our after-sales mailbox: service@iacepc.com.
Suppose you want to take out the information in the product. Please tell me.

Post by **EA7GAH** » Sat May 08, 2021 6:31 pm

admin wrote: ↑Sat May 08, 2021 10:58 am I'm sorry to make you wait so hard. There is no such related tutorial at the factory. We recommend that you replace a brand new T11. You can contact our after-sales mailbox: service@iacepc.com.
Suppose you want to take out the information in the product. Please tell me.

Please wait for a while. I will tell you in a few days

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.