AK1 Motherboard info

Post by **frostyfreeze** » Sat Apr 03, 2021 11:10 pm

How can I find a diagram for the AK1 motherboard? I would like to know what some of the ports on the PCB are for. Thanks!

Post by **admin** » Wed Apr 07, 2021 5:56 am

Hello, you can take pictures on the motherboard. I will explain its role to you.

Post by **witt** » Wed Apr 07, 2021 7:05 am

frostyfreeze wrote: ↑Sat Apr 03, 2021 11:10 pm How can I find a diagram for the AK1 motherboard? I would like to know what some of the ports on the PCB are for. Thanks!

If there is a problem with the computer, it is best to go to after-sales service or contact the administrator. If you damage the motherboard due to your own repairs, the seller will not provide warranty services.

Post by **frostyfreeze** » Thu Apr 08, 2021 5:12 am

Here you go

Post by **admin** » Thu Apr 08, 2021 10:07 am

: Description.png (1.51 MiB) Viewed 6196 times

I explained it on your picture. Regarding the two SATA interfaces, we have adjusted it to a hard disk box, so this function has been cancelled. The VGA cable has no effect in the AK1. So it cannot be used. Hope this description is useful to you. At the same time as Witt said. Do not change the motherboard settings easily, as this will lead to serious consequences.

Post by **frostyfreeze** » Sat Apr 10, 2021 2:22 am

I understand that the SATA function has been cancelled, but do the SATA pins at the top (green circle) still receive power?

And what are the pins next to the fan exhaust (yellow circle)?

Also, is there a way to stop the USB ports from receiving power when the PC is turned off?

Post by **admin** » Tue Apr 13, 2021 1:49 am

Hello, we have removed the power supply of the top SATA pin. The pin next to the fan was used in the factory and used as a factory BIOS upgrade through the FPC cable.
The third problem is that this function can only be solved by flashing the BIOS. Currently, we have not produced this version of the BIOS. The USB port does not consume power.

Post by **frostyfreeze** » Fri Apr 16, 2021 10:52 pm

LAST QUESTION: When I plug in the power cable, the red/orange LED flashes on for a brief second and then turns off. When I turn the computer on, the LED stays solid blue until I turn it off. How can I get the LED to stay on red/orange when the power is off but still plugged in? It used to do that but not anymore.

Post by **admin** » Sat Apr 17, 2021 10:31 am

Hello, this is because the first self-check is unsuccessful due to the BIOS problem, it will flash red light. In normal use, the LED is blue.

Post by **KenB** » Fri Apr 23, 2021 7:00 am

Is the Intel wireless AC 7265 wireless adapter soldered onto the AK1 motherboard? Can it be replaced easily? And can you recommend a replacement adapter (it's form factor m2. 1216, I believe. I've been trying for weeks to get the 7265 working by installing different drivers, but with no luck. I don't need AC but just N wireless. Thanks

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.