Mind-block - How to Autostart T6?

Post by **Rudi452** » Tue Jan 26, 2021 7:25 pm

How do I set the T6 up to start automatic when power is applied, so bypassing the power on button? I was looking for that because mine is on a smarthome outlet and switched remotely anyways. I was expecting that in UEFI settings ... do I need glasses?

Post by **Gabe** » Wed Jan 27, 2021 2:36 am

Rudi452,

Check in the BIOS (Del or Esc key on power up) to see if there is an option that says "Automatic Power On" and enable it. It should turn the unit on when power is applied.

It's primarily designed to restart a unit after sudden power loss.

Post by **Rudi452** » Thu Jan 28, 2021 8:27 am

Not only primarily, it only reboots when power failed but not when powered down before. So, not suited for my case.

Post by **admin** » Thu Jan 28, 2021 10:13 am

Please turn on the computer and press the Del button, enter the BIOS and take a picture. We will send the BIOS according to your version.

Post by **Rudi452** » Thu Jan 28, 2021 2:05 pm

After several starts the problem cured itself without me doing something. I does now start when power applied.

Post by **Gabe** » Thu Jan 28, 2021 11:42 pm

Rudi452 wrote: ↑Thu Jan 28, 2021 2:05 pm After several starts the problem cured itself without me doing something. I does now start when power applied.

That's good to hear.

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.