Restart after power failure

Post by **andymet87** » Wed Jan 13, 2021 5:01 pm

Hi all, hoping someone can help...

I have this...

I desperately need it to automatically restart after a power failure as the PC is being used as a small server. I have changed the Auto Power to 'Power On' in the Bios but it still does not turn on after a power cut.

Please can someone advise what I need to do to get this working?

Thanks in advance

Post by **Gabe** » Wed Jan 13, 2021 9:25 pm

andymet87,

Which model do you have?

Post by **123** » Tue Feb 09, 2021 9:21 am

I have this problem too in an ACEPC AK3V

Post by **admin** » Thu Feb 25, 2021 3:57 am

AK3 can be powered on in the BIOS, this is the tutorial:

Post by **magicman** » Tue Jul 27, 2021 3:25 am

I found a solution,
in my case it starts on after power loss if I disconnect USB-CD drive, I leave the connected only Bluetooth keyboard.
My cd drive is has usb split, I need to install the second usb into TV usb to provide neded power to drive, as It does not work properly if I connect it to the ACEPC only.
I have HDD inside as well.
I suggest disconnecting all USB devices and see if it will work for you as in my case. I guess some static electricity of something else does not allow to work this feature properly.

I have acepc with celeron j3455

admin wrote: ↑Thu Feb 25, 2021 3:57 am AK3 can be powered on in the BIOS, this is the tutorial:

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.