I have had my AK2 for just a few days and with it I bought a small 10" screen which accepts an HDMI input. I can connect the AK2 to my gaming monitor but when I connect out to the small one I cannot get a signal using the same cable etc. I realise this may not be anything I can change on the AK2 but someone might be able to help?
Many thanks,
Gary
Cannot connect AK2 To monitor via HDMI - no signal
-
admin
- Site Admin
- Posts: 2039
- Joined: Mon Mar 16, 2020 9:11 am
- Has thanked: 79 times
- Been thanked: 46 times
Re: Cannot connect AK2 To monitor via HDMI - no signal
Check whether the HDMI cable is in good contact (re-plug and unplug to confirm that the HDMI is in good contact); replace the HDMI cable and try (use the built-in HDMI cable). Check whether the display is switched to HDMI display (VGA, HDMI, DP switch signal source is HDMI); change a display to see if there is any display (exclude 1. Make sure the display is ok, 2. Signal compatibility issues).
Thanks for joining the forum fans, we will become friends here. Any suggestions about the forum I am open to hearing.