AM06 startet nur noch im Bios
AM06 startet nur noch im Bios
ich habe den AM06Pro Ryzen 5825U Ram32 b Rom 512 Gb neu bekommen Windows 11 eingerichtet und Update ausgeführt. Danach startete er nur noch im-Bios. Der Versuch
Win 11 zu reparieren ging leider nicht und bei versuchter Neuinstallation wurde kein Datenträger erkannt vorauf ich installieren könnte .
Was nun ?
Win 11 zu reparieren ging leider nicht und bei versuchter Neuinstallation wurde kein Datenträger erkannt vorauf ich installieren könnte .
Was nun ?
Re: AM06 startet nur noch im Bios
Is the m.2 drive recognized in the BIOS ? I have (another model of) a couple of Am06Pro, on which Windows (and Linux) detects the drive without any additional driver. Don't know the specifics about the 5825 model, but it might require drivers for the m.2 controller.
Everything you (should) need, if a driver is required, is included in the system image for the device.
Everything you (should) need, if a driver is required, is included in the system image for the device.
Re: AM06 startet nur noch im Bios
Nein die Hdsk wird im Bios nicht direkt erkannt im Boot menu steht nur Hdsk keine weitere bezeichnung. Wie komme ichdenn an das Systemabbild
Re: AM06 startet nur noch im Bios
Es wurde kein Systemabbild erstellt da das System erst Kurz zuvor eingerichtet worden ist. Ein Systemupdate vom Win 11 hat dann alles zerschossen. Selbst in der Wiederhestellungsoption wird kein Datenträger zum installiern erkannt.
Re: AM06 startet nur noch im Bios
Both the system image and the drivers pack are located in the two top posts (besides the sticky ones) in this forum:
https://www.minipcunion.com/viewforum.php?f=95
In this case, there might actually be some problem with the m.2 drive, either something Windows 11 did (failed to do), or a actual hardware problem. If you are comfortable with using Linux, you can start it up in 'live' mode, and use GParted to clear out all the partitions on the drive.
You can do the similar thing with free and non-free software like Partition Wizard (MiniTool), Partition Magic (EaseUS) and othes.
https://www.minipcunion.com/viewforum.php?f=95
In this case, there might actually be some problem with the m.2 drive, either something Windows 11 did (failed to do), or a actual hardware problem. If you are comfortable with using Linux, you can start it up in 'live' mode, and use GParted to clear out all the partitions on the drive.
You can do the similar thing with free and non-free software like Partition Wizard (MiniTool), Partition Magic (EaseUS) and othes.
-
- Posts: 4
- Joined: Sun Nov 17, 2024 11:33 pm
- Has thanked: 1 time
Re: AM06 startet nur noch im Bios
Once you get past the hard drive issue and can install Windows again. I had to do this: I started fresh. After several boot hangs and crashes I started to investigate the troublesome install. Initially, turning off CPU Virtualization in the bios cured the issue of not booting and crashing. But then soon realized the virtualization was needed for Windows subsystem for Linux (WSL)
Did some more research on this and found disabling NX mode and then reenabling cpu virtualization (SVM Mode) in the bios fixed the problem. I don't blame the hardware or ACE Magic for this. I only tell this story because many others were installing a fresh copy of Windows on to their devices. BTW Ubuntu and Linux Mint run great natively on these machines. A note as well, copy the drivers that are available from Ace Magic's support site, unzip them, and place in a folder on the Windows USB installation drive you're using with the Windows ISO image (Rufus method). After installing the drivers, rebooted, and downloading AMD's Adrenalin software to get all AMD drivers for the hardware. Things are running smoothly. Now, very happy with the purchase and any frustrations were self-induced by me. Hope this helps.

Re: AM06 startet nur noch im Bios
Soo ich habe jetzt mit div bootable Partition Tools versucht zum booten alles vergeblich es kommt immer eine Error Meldung und das Partitionstool startet nicht.
Re: AM06 startet nur noch im Bios
1. Restore BIOS to Default Settings
To begin, restore the BIOS settings to their default values. You can follow this video tutorial for guidance: [How to Restore BIOS Settings]
2. Check Hard Drive Connection
Ensure that the hard drive is properly connected. It may not be fully inserted or could have a loose connection. Refer to this video for instructions on reinstalling the internal SSD: [Reinstall Internal SSD]
3. Contact Support if Issues Persist
If the issue persists, please provide a clear photo of the BIOS main page and your purchase order number (to protect your privacy, we recommend sharing this information via private message or email at barry@minipcunion.com). We will verify and analyze the issue for you
To begin, restore the BIOS settings to their default values. You can follow this video tutorial for guidance: [How to Restore BIOS Settings]
2. Check Hard Drive Connection
Ensure that the hard drive is properly connected. It may not be fully inserted or could have a loose connection. Refer to this video for instructions on reinstalling the internal SSD: [Reinstall Internal SSD]
3. Contact Support if Issues Persist
If the issue persists, please provide a clear photo of the BIOS main page and your purchase order number (to protect your privacy, we recommend sharing this information via private message or email at barry@minipcunion.com). We will verify and analyze the issue for you
Re: AM06 startet nur noch im Bios
Ich habe ihre Anleitung befolgt und alles wie im Video gemacht .
Das Problem besteht weiterhin.
Wenn ich mit dem Stick Boote kommt :
werde mich jetzt an den Support wenden.
Das Problem besteht weiterhin.
Wenn ich mit dem Stick Boote kommt :
werde mich jetzt an den Support wenden.