disco SATA su AK1PRO

Post by **rocarra** » Sat Sep 23, 2023 11:58 am

Si può utilizzare un Disco SATA III da 2.5" su AK1Pro è compatibile?

Post by **Gabe** » Sat Sep 23, 2023 7:10 pm

rocarra wrote: ↑Sat Sep 23, 2023 11:58 am Si può utilizzare un Disco SATA III da 2.5" su AK1Pro è compatibile?

Yes. The detachable drive carriage on the bottom of the unit is designed for a 2.5" drive.

Post by **barry777** » Sun Sep 24, 2023 1:29 pm

Video of the steps to install a 2.5-inch SSD in the AK1 series:

Post by **rocarra** » Sun Sep 24, 2023 4:38 pm

Ciao! Ho eseguito correttamente l'installazione del disco
SATA III da 512GB, cosi come visto nel video. Rimontato
il tutto ed acceso il MiniPC in esplora risorse non trovo
il disco appena montato.Fanxiang S101 512GB SSD
SATA III 6Gb/s 2,5" Interno Solid State Drive.
Riprovata l'installazione più volte, ma niente
riconoscimento. Ho qualche perplessità sulla sua
compatibilità. Cosa ne pensate?

Post by **Gabe** » Mon Sep 25, 2023 3:23 am

rocarra,

Right click "This PC" and click "Manage". This should open the Disk Management. See if the drive is listed. If it is, you'll probably need to create a partition and format the partition. Once this is done, the drive should show up in the This PC window.

You can also use something like MiniTool Partition Wizard to create a partition and format it.

If you're still not seeing the drive, check in the BIOS to see if the system is recognizing the drive in the Boot section. Don't change it to that drive, just check if the system is seeing or recognizing the drive. You can enter the BIOS by tapping the Del key immediately after starting the unit.

Post by **barry777** » Tue Sep 26, 2023 1:14 am

Refer to the following video:

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.