Need Drivers for T11 hardware devices

Someone will always care about you.
Post Reply
dkaplan
Posts: 7
Joined: Fri Apr 17, 2020 3:59 pm

Need Drivers for T11 hardware devices

Post by dkaplan »

I've had a T11 since February, 2020. I also own two Wintel Pro 4GB/64GB PCs and four Intel Compute Sticks (2GB/32GB). Of all these mini computers, the T11 is the slowest and least stable. Just after purchase I tried to update the BIOS which is dated from 2018. However, after corresponding with you several times because the available BIOS updates would not load, you told me that there was no need to update to a newer BIOS. Continuing to be frustrated by the slow performance and occasional times when the system would stall completely and need to be rebooted, I decided to try reinstalling Windows 10 Pro. I've done so successfully using your T8U_1909_Pro_X64_6255_en_de_es_fr_it_ru_zh_2020013 installer. The system is working and appears to be stable (though I'm still not impressed with the speed). However, three devices remain that need drivers:
-Multimedia Controller
-PCI Data Acquisition and Signal Processing Controller
-Unknown device
See also the attached screen capture from the Device Manager. Where can I get the drivers needed to support this hardware?
Attachments
ACEPC-T11_DevicesNeedDrivers_20200816.jpg
ACEPC-T11_DevicesNeedDrivers_20200816.jpg (9.92 KiB) Viewed 3735 times
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1988
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 41 times
Been thanked: 116 times

Re: Need Drivers for T11 hardware devices

Post by Gabe »

I believe you can find the drivers here.

viewtopic.php?p=136#p136

Though the title might be a bit confusing, I believe it's referring to all of the drivers for Z8350 systems (T5, T8, T11, etc.) , not just the driver for the Z8350 processor itself.

Hope this helps. :)
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10 • AK2 Pro
I have no connection to ACEMAGIC other than being a customer and long time forum member
Post Reply

Return to “Emergency”