HELP! AK2 fan not working and no display!

Post by **john_willson** » Fri Apr 21, 2023 4:42 am

Hi admin,

My ACEPC ak2 8gb 128gb modle, couldn't boot anymore.
After plus the power supply, blue led light up, and fan not working, No display.
I try to push power bottom for 10s, it turned off. And then push again, it still the same, no fan, no display!
What should I do?

thx

Post by **barry777** » Fri Apr 21, 2023 7:41 am

It is recommended to try bios discharge, refer to the following video:

Post by **Cute_N_Classy83** » Sat Apr 22, 2023 12:02 pm

I'm having the exact same issue. Plugged it in after a few years of not using it and the blue light came on, but no fan and no display. I tried the BIOS trick and the fan has come back on and I can hear it running, but still no display. It seems my fan only works when the BIOS is disconnected. I've tried connecting the HDMI to both the TV and a monitor with no display on either. If I can't resolve mine in the next few days, it'll be going to a repair shop. Good luck!

Post by **john_willson** » Mon May 29, 2023 5:24 am

barry777 wrote: ↑Fri Apr 21, 2023 7:41 am It is recommended to try bios discharge, refer to the following video:

I think a bios update is needed. can you or someone else provide the bios files of this product? i need to try burn it to a nee flash.

Post by **barry777** » Tue May 30, 2023 2:10 am

Currently there is no bios update, you can try to restore the default value of bios.

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.