Fixing AM06Pro Testing/Update Issues

[Botorototo]

Exact same error message as everybody else here: 10 - Error: Unable to load driver.

Thus, the BIOS update is impossible to update.

Even disabling Core isolation with Vulnerable Driver Blocklist disabled, the BIOS update results in the same error.

MiniPC: NiPoGi AM06PRO 5500U

[Matthew71]

Unfortunately also for me it is the same. Bios installing is stopping with code "10 - Error: Unable to load driver".

NiPoGi AM06 PRO Ryzen 7 5825U 32GB RAM

[Matthew71]

In case of Error 10 it seems not to be the BIOS file, but the flash tool from AMI.
I downloaded the original tool from the AMI side to try the flashing of the BIOS with this, but at least it was the same result.
Then I tried only starting the flash tool within cmd and also got the same error.

Is there a possibility to flash/update the BIOS from Boot?

[barry777]

In case of Error 10 it seems not to be the BIOS file, but the flash tool from AMI.
I downloaded the original tool from the AMI side to try the flashing of the BIOS with this, but at least it was the same result.
Then I tried only starting the flash tool within cmd and also got the same error.

Is there a possibility to flash/update the BIOS from Boot?

Please refer to the second section of the solution in the following link: Update BIOS via Shell Interface：

[Botorototo]

Please refer to the second section of the solution in the following link: Update BIOS via Shell Interface：

Thanks for the instructions, hope this fixes the random reboots that plenty of users of the AM06PRO are going through - as reported here viewtopic.php?t=5543