AM06 Pro | Ryzen 7 6800 H / Radeon 680 M | SYS_FAN

[enCore93]

Hey Everyone,

I am new to the Mini-PC Universe and just bought an Acemagic AM06Pro with the Ryzen 7 6800H processor and integrated iGPU 680M.

The RAM was instantly upgraded to 32 GB by Crucial.

So far I am very pleased with the performance, and the whole system runs very well. I use it for playing mostly older games and working from home.

Due to thermal issues (CPU / GPU idle temp 65°C and upwards, 85°C+ while gaming), I drilled a lot of holes in the upper part of the case and added an anti-dust net.

The temperatures dropped down about 15°C . Now I plan to add another fan to the bottom of the case where the slot for the 2.5" SSD is located.

I bought a 80mm PWM-4PIN fan with a very low height and plan to remove some of the chessboard-like plastics on the bottom of the case to attach the fan leveled to get a better cooling of the RAM and the whole mainboard.

To do so, I would like to attach the fan to the SYS_FAN 4-PIN-Connector on the mainboard, which is currently not in use as there is only the CPU-FAN connected.

Unfortunately, I am desperate to find a fitting 4-PIN-Connector and I could not figure out any information about the mainboard and the built-in connectors.

It seems that they are much smaller than conventional 4-PIN-Connectors. Like Nano-4PIN Stuff!

Does anyone of you wonderful people know what connector the mainboard uses? And what Connector do I need to use? And do you guys think that there might be a problem with powering the FAN? Or to change the regular 4-PIN with the small-nano-like-one?

Thank you in advance!