Best Minipc Forum

The LED’s are wired in series, one goes out they all go out The LED backboard gets Hot real Hot, that’s probably the reason for the high failure rate Heatsink Requirement Needed I will be opening it up, measuring out what heatsinks to stick-on with thermal pads, that should take care of that Thinkin...

It is a fan header the new AM08pro Ryzen 7 has a fan door An easier way to do this would be to buy the fan door that’s available.. Need this door !! Another heat problem- the LED board, need heatsink on that a.s.a.p. That’s probably the reason so many LED failures Who can i email to get one of the f...

Was hoping it could be used as a fan header Going to connect a mini fan to blow across M.2 and memory, dremel an exhaust vent slot on top and a 30mm fan intake hole at bottom, get some fresh air blowing over the m.2 drive and Ram Guess I’ll pull the multi meter out and see if we have 3v or 5v pins t...

We have v2 AM08pro 6900 with Two m.2 ports

What is this white 4pin connector for?

Who Cares? We care..

What can we do?
Electrical Tape to the rescue

Using scissors I carefully cut strips
to cover the top sides and the ACE Logo
I left the small MAGICIAN Logo uncovered

Now it’s Perfect

My LED’s died too..
Almost lasted one (1) full year
November 27th 2023 to November 11th 2024
Kinda sucks because the power knob LED goes out as well

The power LED let’s me know the powers ON and what Mode it’s in, so kind of important to at Least have that running

Absolutely No Control of the fan through bios No matter what settings you change Nothing will happen No Software will tie-in and control it either there is No Way to control this fan on the am08pro i want to keep the temps down from Bursting into the 90's C i want an even keel 70 or 80% fan all the ...

yes it returns to Default on reboot, which stinks..

when you turn it off in the software, the power button remains lit which is Great..
i do like the power button still lit up..

hope they're working on this feature